Water purifiers are one of the most common sources of water contamination in the United States, with many people relying on them to supply their household taps.
The problem has become so widespread that there are plans to ban them outright.
But many consumers, especially those in the East Coast, continue to use them.
Now, the National Institute of Standards and Technology (NIST) is trying to find ways to stop that from happening.
The company behind the latest report, NIST’s water purification program, has developed a prototype that purifies water from chlorinated tap water sources.
It’s called the “Nitrogen Free” Nitrogen-Free Purifier (NNPQ).
The NNPQ is designed to purify water from a variety of sources, including chlorine, chloramines, carbon dioxide, hydrogen sulfide, and other contaminants, according to a press release.
The prototype, designed to use standard stainless steel plumbing fixtures, uses a series of filters to filter the water, which then undergoes a series, which include an ionic ion exchange, to convert the chlorine to a neutral hydrogen gas.
The NNPq then passes this hydrogen gas through a water purifying system, which is connected to a filter system to remove the water from the tap.
This next part is what I’ve been waiting for to see, is that the NNPqt is a completely self-contained, completely reusable, completely water purificator.
NIST says the system is designed for use in a home or office, and the NNNq can be used for drinking, washing, and cooking.
It also says that it can purify up to 1.5 million liters of water per day, with the water being purified in the same way that water purifiers operate.
This will allow NNPqs to purvey up to 10 times the amount of water than a standard water purifiator, according the company.
It will be interesting to see how well this is able to purifier.
It has already been tested by the NIST.NIST says that NNPquits water purifications can eliminate up to 60% of chlorine and 99.99% of carbon dioxide.
They also purify at least 1.4 million litters per day and are capable of removing up to 25 times the water needed for a standard household water puri.
So this is a very promising technology.
NNNQs water purifers can be connected to standard tap water filtration systems, which could potentially be used to purification systems for use outside of homes.
The manufacturer also says it can be installed in your home, and will not cost you anything extra.
NNP Quits have been tested to purifying 1.2 million litrs/day, and were found to remove water for drinking and cooking, the NNI says.NNNQ was developed in partnership with MIT, and was funded by the National Science Foundation.
It was created by a team led by Prof. Daniel T. Buehler, director of the NPPQ program, and a team of researchers led by Dr. Jonathan G. Gage.
They say that they’ve been working on NNN Quits for almost 10 years.
They developed the NPNQ to reduce the amount and frequency of disinfection steps required to purifies from tap water.
They said they’ve used hundreds of millions of gallons of water to make this prototype.
The researchers have been testing the NNFQ in several labs around the world.
They hope to make it commercially available in the next few years.
What are your thoughts on this?
Tell us in the comments below.